Wall surfaces can be used for the heat output. There are three main advantages that make this system worth of considering:
- A wall heating system fulfils the efficiency parameter – one of the most important parameters of sustainable building
- It requires very low flow temperatures that enables to combine it with other surface heating systems
- Warm walls are regarded as very pleasant.
3THERMO SYSTEM PRESENTATION
3Thermo Radiator
The 3THERMO radiator (concealed or for drywall installation) is adjusted for serial connections. The recommended system installation is SIRK. The radiator should be covered with a standard layer of plasterwork (1-2 cm) or plasterboard. The 3THERMO system does not require any special plaster mixtures as its construction reinforces the plaster work and does not cause any stresses.
Installation of 3Thermo radiators – before and after installing
|
Flow G=0.045 kg/s |
Heating capacity for a 1.5 cm layer of plaster 0.8W/mK and the temperature in the room: |
ΔT for a circuit up to 10K |
||
|
Supply temperature |
16°C |
20°C |
24°C |
Maximum number of radiators in a circuit |
|
60°C |
258 W |
235 W |
206 W |
6 |
|
55°C |
226 W |
201 W |
174 W |
8 |
|
50°C |
193 W |
173 W |
142 W |
10 |
|
45°C |
161 W |
140 W |
111 W |
12 |
|
40°C |
130 W |
111 W |
81 W |
14 |
|
35°C |
100 W |
82 W |
55 W |
15 |
For more information please open the technical sheet of 3Thermo system
Hello!
Guten Tag!
Ciao!
Bonjour!